clariti 1 day toric
Manufacturer-listedCooperVision · Toric · Daily
Daily disposable toric lens whose available axes depend on both sphere band and cylinder power. Five source-defined blocks are retained separately.
Core specifications
- Lens design
- Toric
- Replacement schedule
- Daily
- Material
- Silicone hydrogel
- Material name
- somofilcon A
- Base curve
- 8.6 mm
- Diameter
- 14.3 mm
- Water content
- 56%
- Cylinder / axis
- Combination dependent — see parameters
- Add power / label
- Not applicable
- Market
- United States
- Product status
- Manufacturer-listed
Oxygen properties
Manufacturer Dk/t at −3.00 D, in 10⁻⁹ [(cm/sec) × (mL O₂)/(mL × mmHg)], as specified by the reference-guide footnote. Dk is not supplied by these sources and is not derived from Dk/t. Dk and Dk/t are distinct properties; neither is calculated from the other.
Find a valid combination
Choose one or more parameters. All selected values must occur together in a single lens variant. This checks the documented parameter grid, not current stock.
The five published sphere/cylinder/axis blocks must not be merged. For example, −7.00 / −2.25 × 80° is absent even though 80° occurs in other blocks. Positive spheres do not include −2.25 cylinder. Axis zero is represented by the manufacturer's 180° listing, not added as a second option.
2332 combinations represented from the source grid. Individual values cannot be freely combined.
View listed combinations (2332 total)
Each row is one combination represented from the source grid. “Not applicable” means this design does not use that parameter.
| Variant | Sphere (D) | Cylinder (D) | Axis (°) | Add power / label | Base curve (mm) | Diameter (mm) |
|---|---|---|---|---|---|---|
| Plano to −6.00 · cylinder −0.75/−1.25/−1.75 | -6.00 | -0.75 | 10° | Not applicable | 8.6 | 14.3 |
| Plano to −6.00 · cylinder −0.75/−1.25/−1.75 | -6.00 | -0.75 | 20° | Not applicable | 8.6 | 14.3 |
| Plano to −6.00 · cylinder −0.75/−1.25/−1.75 | -6.00 | -0.75 | 30° | Not applicable | 8.6 | 14.3 |
| Plano to −6.00 · cylinder −0.75/−1.25/−1.75 | -6.00 | -0.75 | 40° | Not applicable | 8.6 | 14.3 |
| Plano to −6.00 · cylinder −0.75/−1.25/−1.75 | -6.00 | -0.75 | 50° | Not applicable | 8.6 | 14.3 |
| Plano to −6.00 · cylinder −0.75/−1.25/−1.75 | -6.00 | -0.75 | 60° | Not applicable | 8.6 | 14.3 |
| Plano to −6.00 · cylinder −0.75/−1.25/−1.75 | -6.00 | -0.75 | 70° | Not applicable | 8.6 | 14.3 |
| Plano to −6.00 · cylinder −0.75/−1.25/−1.75 | -6.00 | -0.75 | 80° | Not applicable | 8.6 | 14.3 |
| Plano to −6.00 · cylinder −0.75/−1.25/−1.75 | -6.00 | -0.75 | 90° | Not applicable | 8.6 | 14.3 |
| Plano to −6.00 · cylinder −0.75/−1.25/−1.75 | -6.00 | -0.75 | 100° | Not applicable | 8.6 | 14.3 |
| Plano to −6.00 · cylinder −0.75/−1.25/−1.75 | -6.00 | -0.75 | 110° | Not applicable | 8.6 | 14.3 |
| Plano to −6.00 · cylinder −0.75/−1.25/−1.75 | -6.00 | -0.75 | 120° | Not applicable | 8.6 | 14.3 |
| Plano to −6.00 · cylinder −0.75/−1.25/−1.75 | -6.00 | -0.75 | 130° | Not applicable | 8.6 | 14.3 |
| Plano to −6.00 · cylinder −0.75/−1.25/−1.75 | -6.00 | -0.75 | 140° | Not applicable | 8.6 | 14.3 |
| Plano to −6.00 · cylinder −0.75/−1.25/−1.75 | -6.00 | -0.75 | 150° | Not applicable | 8.6 | 14.3 |
| Plano to −6.00 · cylinder −0.75/−1.25/−1.75 | -6.00 | -0.75 | 160° | Not applicable | 8.6 | 14.3 |
| Plano to −6.00 · cylinder −0.75/−1.25/−1.75 | -6.00 | -0.75 | 170° | Not applicable | 8.6 | 14.3 |
| Plano to −6.00 · cylinder −0.75/−1.25/−1.75 | -6.00 | -0.75 | 180° | Not applicable | 8.6 | 14.3 |
| Plano to −6.00 · cylinder −0.75/−1.25/−1.75 | -6.00 | -1.25 | 10° | Not applicable | 8.6 | 14.3 |
| Plano to −6.00 · cylinder −0.75/−1.25/−1.75 | -6.00 | -1.25 | 20° | Not applicable | 8.6 | 14.3 |
| Plano to −6.00 · cylinder −0.75/−1.25/−1.75 | -6.00 | -1.25 | 30° | Not applicable | 8.6 | 14.3 |
| Plano to −6.00 · cylinder −0.75/−1.25/−1.75 | -6.00 | -1.25 | 40° | Not applicable | 8.6 | 14.3 |
| Plano to −6.00 · cylinder −0.75/−1.25/−1.75 | -6.00 | -1.25 | 50° | Not applicable | 8.6 | 14.3 |
| Plano to −6.00 · cylinder −0.75/−1.25/−1.75 | -6.00 | -1.25 | 60° | Not applicable | 8.6 | 14.3 |
| Plano to −6.00 · cylinder −0.75/−1.25/−1.75 | -6.00 | -1.25 | 70° | Not applicable | 8.6 | 14.3 |
| Plano to −6.00 · cylinder −0.75/−1.25/−1.75 | -6.00 | -1.25 | 80° | Not applicable | 8.6 | 14.3 |
| Plano to −6.00 · cylinder −0.75/−1.25/−1.75 | -6.00 | -1.25 | 90° | Not applicable | 8.6 | 14.3 |
| Plano to −6.00 · cylinder −0.75/−1.25/−1.75 | -6.00 | -1.25 | 100° | Not applicable | 8.6 | 14.3 |
| Plano to −6.00 · cylinder −0.75/−1.25/−1.75 | -6.00 | -1.25 | 110° | Not applicable | 8.6 | 14.3 |
| Plano to −6.00 · cylinder −0.75/−1.25/−1.75 | -6.00 | -1.25 | 120° | Not applicable | 8.6 | 14.3 |
Showing the first 30 of 2332 listed combinations. Select more parameters to narrow the list.
Official manufacturer sources
Transcribed from CooperVision's U.S. practitioner specifications and May 2026 product reference guide. Coverage means the listed product's published grid, not real-time inventory or every CooperVision product.
The five published sphere/cylinder/axis blocks must not be merged. For example, −7.00 / −2.25 × 80° is absent even though 80° occurs in other blocks. Positive spheres do not include −2.25 cylinder. Axis zero is represented by the manufacturer's 180° listing, not added as a second option.
Accessed
Location: Product Details / parameter specification table
Supports: Material type; Water content; Replacement schedule; Base curve; Diameter; Sphere power; Cylinder power; Axis; Add power / label; Dk/t · transmissibility
Accessed · Revision: 17345-6 · 05/2026
Location: Page 4, clariti 1 day toric, five parameter blocks row; Dk/t footnote
Supports: Material type; Water content; Replacement schedule; Base curve; Diameter; Sphere power; Cylinder power; Axis; Add power / label; Dk/t · transmissibility
- Parameter coverage
- Complete within the cited parameter grid
- Listed parameters
- 2332 listed combinations
- Search aliases
- None listed
Parameter matches describe the cited U.S. source grid. They do not confirm stock or establish clinical interchangeability.