ACUVUE VITA for ASTIGMATISM
Manufacturer-listedACUVUE · Toric · Monthly
Monthly replacement toric senofilcon C lens, using the current expanded U.S. parameter table.
Core specifications
- Lens design
- Toric
- Replacement schedule
- Monthly
- Material
- Silicone hydrogel
- Material name
- senofilcon C
- Base curve
- 8.6 mm
- Diameter
- 14.5 mm
- Water content
- 41%
- Cylinder / axis
- Combination dependent — see parameters
- Add power / label
- Not applicable
- Market
- United States
- Product status
- Manufacturer-listed
Oxygen properties
Dk/t is reported in ×10⁻⁹ (cm/s)(mL O₂/mL·mmHg), at the center of a −3.00 D lens at 35°C using a polarographic method with boundary and edge corrections. Dk is not separately supplied in the cited specification table. Dk and Dk/t are distinct properties; neither is calculated from the other.
Find a valid combination
Choose one or more parameters. All selected values must occur together in a single lens variant. This checks the documented parameter grid, not current stock.
Current U.S. specifications list −6.00 to +6.00 D in 0.25 D steps, then −6.50 to −9.00 D in 0.50 D steps. Each band has five cylinders (−0.75 through −2.75) and axes 10° through 180° in 10° steps. The current table and v17 guide supersede the narrower VITA grid in the older v12 guide.
4950 combinations represented from the source grid. Individual values cannot be freely combined.
View listed combinations (4950 total)
Each row is one combination represented from the source grid. “Not applicable” means this design does not use that parameter.
| Variant | Sphere (D) | Cylinder (D) | Axis (°) | Add power / label | Base curve (mm) | Diameter (mm) |
|---|---|---|---|---|---|---|
| −6.00 to +6.00 / five cylinders / 18 axes | -6.00 | -0.75 | 10° | Not applicable | 8.6 | 14.5 |
| −6.00 to +6.00 / five cylinders / 18 axes | -6.00 | -0.75 | 20° | Not applicable | 8.6 | 14.5 |
| −6.00 to +6.00 / five cylinders / 18 axes | -6.00 | -0.75 | 30° | Not applicable | 8.6 | 14.5 |
| −6.00 to +6.00 / five cylinders / 18 axes | -6.00 | -0.75 | 40° | Not applicable | 8.6 | 14.5 |
| −6.00 to +6.00 / five cylinders / 18 axes | -6.00 | -0.75 | 50° | Not applicable | 8.6 | 14.5 |
| −6.00 to +6.00 / five cylinders / 18 axes | -6.00 | -0.75 | 60° | Not applicable | 8.6 | 14.5 |
| −6.00 to +6.00 / five cylinders / 18 axes | -6.00 | -0.75 | 70° | Not applicable | 8.6 | 14.5 |
| −6.00 to +6.00 / five cylinders / 18 axes | -6.00 | -0.75 | 80° | Not applicable | 8.6 | 14.5 |
| −6.00 to +6.00 / five cylinders / 18 axes | -6.00 | -0.75 | 90° | Not applicable | 8.6 | 14.5 |
| −6.00 to +6.00 / five cylinders / 18 axes | -6.00 | -0.75 | 100° | Not applicable | 8.6 | 14.5 |
| −6.00 to +6.00 / five cylinders / 18 axes | -6.00 | -0.75 | 110° | Not applicable | 8.6 | 14.5 |
| −6.00 to +6.00 / five cylinders / 18 axes | -6.00 | -0.75 | 120° | Not applicable | 8.6 | 14.5 |
| −6.00 to +6.00 / five cylinders / 18 axes | -6.00 | -0.75 | 130° | Not applicable | 8.6 | 14.5 |
| −6.00 to +6.00 / five cylinders / 18 axes | -6.00 | -0.75 | 140° | Not applicable | 8.6 | 14.5 |
| −6.00 to +6.00 / five cylinders / 18 axes | -6.00 | -0.75 | 150° | Not applicable | 8.6 | 14.5 |
| −6.00 to +6.00 / five cylinders / 18 axes | -6.00 | -0.75 | 160° | Not applicable | 8.6 | 14.5 |
| −6.00 to +6.00 / five cylinders / 18 axes | -6.00 | -0.75 | 170° | Not applicable | 8.6 | 14.5 |
| −6.00 to +6.00 / five cylinders / 18 axes | -6.00 | -0.75 | 180° | Not applicable | 8.6 | 14.5 |
| −6.00 to +6.00 / five cylinders / 18 axes | -6.00 | -1.25 | 10° | Not applicable | 8.6 | 14.5 |
| −6.00 to +6.00 / five cylinders / 18 axes | -6.00 | -1.25 | 20° | Not applicable | 8.6 | 14.5 |
| −6.00 to +6.00 / five cylinders / 18 axes | -6.00 | -1.25 | 30° | Not applicable | 8.6 | 14.5 |
| −6.00 to +6.00 / five cylinders / 18 axes | -6.00 | -1.25 | 40° | Not applicable | 8.6 | 14.5 |
| −6.00 to +6.00 / five cylinders / 18 axes | -6.00 | -1.25 | 50° | Not applicable | 8.6 | 14.5 |
| −6.00 to +6.00 / five cylinders / 18 axes | -6.00 | -1.25 | 60° | Not applicable | 8.6 | 14.5 |
| −6.00 to +6.00 / five cylinders / 18 axes | -6.00 | -1.25 | 70° | Not applicable | 8.6 | 14.5 |
| −6.00 to +6.00 / five cylinders / 18 axes | -6.00 | -1.25 | 80° | Not applicable | 8.6 | 14.5 |
| −6.00 to +6.00 / five cylinders / 18 axes | -6.00 | -1.25 | 90° | Not applicable | 8.6 | 14.5 |
| −6.00 to +6.00 / five cylinders / 18 axes | -6.00 | -1.25 | 100° | Not applicable | 8.6 | 14.5 |
| −6.00 to +6.00 / five cylinders / 18 axes | -6.00 | -1.25 | 110° | Not applicable | 8.6 | 14.5 |
| −6.00 to +6.00 / five cylinders / 18 axes | -6.00 | -1.25 | 120° | Not applicable | 8.6 | 14.5 |
Showing the first 30 of 4950 listed combinations. Select more parameters to narrow the list.
Official manufacturer sources
Reviewed November 9, 2026 against U.S. Johnson & Johnson Vision professional product specifications and the current v17 guide. Completeness describes the published parameter grid, not stock or the entire ACUVUE portfolio. Package quantities are not modeled.
Current U.S. specifications list −6.00 to +6.00 D in 0.25 D steps, then −6.50 to −9.00 D in 0.50 D steps. Each band has five cylinders (−0.75 through −2.75) and axes 10° through 180° in 10° steps. The current table and v17 guide supersede the narrower VITA grid in the older v12 guide.
Accessed
Location: Lens specifications table and oxygen-transmissibility footnote.
Supports: Identity; Replacement schedule; Material type; Sphere power; Base curve; Diameter; Water content; Dk/t · transmissibility; Cylinder power; Axis
Accessed · Revision: PP2020ACLP4800 v17 · ©2026
Location: Page 3: product column and parameter grid; page 4: measurement footnotes. Linked from the U.S. Lens Parameters page.
Supports: Identity; Replacement schedule; Material type; Sphere power; Base curve; Diameter; Water content; Dk/t · transmissibility; Cylinder power; Axis
- Parameter coverage
- Complete within the cited parameter grid
- Listed parameters
- 4950 listed combinations
- Search aliases
- Vita monthly toric, Johnson and Johnson
Parameter matches describe the cited U.S. source grid. They do not confirm stock or establish clinical interchangeability.