ULTRA Multifocal for Astigmatism
Manufacturer-listedBausch + Lomb · Multifocal toric · Monthly
Monthly replacement multifocal toric lens; its higher cylinders use a restricted axis set.
Core specifications
- Lens design
- Multifocal toric
- Replacement schedule
- Monthly
- Material
- Silicone hydrogel
- Material name
- samfilcon A
- Base curve
- 8.6 mm
- Diameter
- 14.5 mm
- Water content
- 46%
- Cylinder / axis
- Combination dependent — see parameters
- Add power / label
- Combination dependent — see parameters
- Market
- United States
- Product status
- Manufacturer-listed
Oxygen properties
Manufacturer lists Dk/t 114 at −3.00 D. The product parameter table does not specify its measurement method or unit scale. Dk is not reported here and is not inferred from Dk/t. Dk and Dk/t are distinct properties; neither is calculated from the other.
Find a valid combination
Choose one or more parameters. All selected values must occur together in a single lens variant. This checks the documented parameter grid, not current stock.
Sphere −6.00 to +4.00 D in 0.25 D steps. Cylinders −0.75, −1.25, −1.75 D use all 10° axes; −2.25 and −2.75 D use only 10°, 20°, 70°, 80°, 90°, 100°, 110°, 160°, 170°, 180°. Low and High are manufacturer add categories, not individual numeric powers. The source maps Low to spectacle adds +0.75 to +1.50 D and High to +1.75 to +2.50 D.
6068 combinations represented from the source grid. Individual values cannot be freely combined.
View listed combinations (6068 total)
Each row is one combination represented from the source grid. “Not applicable” means this design does not use that parameter.
| Variant | Sphere (D) | Cylinder (D) | Axis (°) | Add power / label | Base curve (mm) | Diameter (mm) |
|---|---|---|---|---|---|---|
| Standard cylinders · all 10° axes · Low/High | -6.00 | -0.75 | 10° | Low | 8.6 | 14.5 |
| Standard cylinders · all 10° axes · Low/High | -6.00 | -0.75 | 10° | High | 8.6 | 14.5 |
| Standard cylinders · all 10° axes · Low/High | -6.00 | -0.75 | 20° | Low | 8.6 | 14.5 |
| Standard cylinders · all 10° axes · Low/High | -6.00 | -0.75 | 20° | High | 8.6 | 14.5 |
| Standard cylinders · all 10° axes · Low/High | -6.00 | -0.75 | 30° | Low | 8.6 | 14.5 |
| Standard cylinders · all 10° axes · Low/High | -6.00 | -0.75 | 30° | High | 8.6 | 14.5 |
| Standard cylinders · all 10° axes · Low/High | -6.00 | -0.75 | 40° | Low | 8.6 | 14.5 |
| Standard cylinders · all 10° axes · Low/High | -6.00 | -0.75 | 40° | High | 8.6 | 14.5 |
| Standard cylinders · all 10° axes · Low/High | -6.00 | -0.75 | 50° | Low | 8.6 | 14.5 |
| Standard cylinders · all 10° axes · Low/High | -6.00 | -0.75 | 50° | High | 8.6 | 14.5 |
| Standard cylinders · all 10° axes · Low/High | -6.00 | -0.75 | 60° | Low | 8.6 | 14.5 |
| Standard cylinders · all 10° axes · Low/High | -6.00 | -0.75 | 60° | High | 8.6 | 14.5 |
| Standard cylinders · all 10° axes · Low/High | -6.00 | -0.75 | 70° | Low | 8.6 | 14.5 |
| Standard cylinders · all 10° axes · Low/High | -6.00 | -0.75 | 70° | High | 8.6 | 14.5 |
| Standard cylinders · all 10° axes · Low/High | -6.00 | -0.75 | 80° | Low | 8.6 | 14.5 |
| Standard cylinders · all 10° axes · Low/High | -6.00 | -0.75 | 80° | High | 8.6 | 14.5 |
| Standard cylinders · all 10° axes · Low/High | -6.00 | -0.75 | 90° | Low | 8.6 | 14.5 |
| Standard cylinders · all 10° axes · Low/High | -6.00 | -0.75 | 90° | High | 8.6 | 14.5 |
| Standard cylinders · all 10° axes · Low/High | -6.00 | -0.75 | 100° | Low | 8.6 | 14.5 |
| Standard cylinders · all 10° axes · Low/High | -6.00 | -0.75 | 100° | High | 8.6 | 14.5 |
| Standard cylinders · all 10° axes · Low/High | -6.00 | -0.75 | 110° | Low | 8.6 | 14.5 |
| Standard cylinders · all 10° axes · Low/High | -6.00 | -0.75 | 110° | High | 8.6 | 14.5 |
| Standard cylinders · all 10° axes · Low/High | -6.00 | -0.75 | 120° | Low | 8.6 | 14.5 |
| Standard cylinders · all 10° axes · Low/High | -6.00 | -0.75 | 120° | High | 8.6 | 14.5 |
| Standard cylinders · all 10° axes · Low/High | -6.00 | -0.75 | 130° | Low | 8.6 | 14.5 |
| Standard cylinders · all 10° axes · Low/High | -6.00 | -0.75 | 130° | High | 8.6 | 14.5 |
| Standard cylinders · all 10° axes · Low/High | -6.00 | -0.75 | 140° | Low | 8.6 | 14.5 |
| Standard cylinders · all 10° axes · Low/High | -6.00 | -0.75 | 140° | High | 8.6 | 14.5 |
| Standard cylinders · all 10° axes · Low/High | -6.00 | -0.75 | 150° | Low | 8.6 | 14.5 |
| Standard cylinders · all 10° axes · Low/High | -6.00 | -0.75 | 150° | High | 8.6 | 14.5 |
Showing the first 30 of 6068 listed combinations. Select more parameters to narrow the list.
Official manufacturer sources
The current U.S. product table pairs each cylinder group with its own axis list. Both labeled adds cover the stated sphere range. Parameters from non-U.S. expansions are not imported.
Sphere −6.00 to +4.00 D in 0.25 D steps. Cylinders −0.75, −1.25, −1.75 D use all 10° axes; −2.25 and −2.75 D use only 10°, 20°, 70°, 80°, 90°, 100°, 110°, 160°, 170°, 180°. Low and High are manufacturer add categories, not individual numeric powers. The source maps Low to spectacle adds +0.75 to +1.50 D and High to +1.75 to +2.50 D.
Accessed
Location: Two ADD powers across the entire power range; parameter table cylinder groups paired with axis groups
Supports: U.S. market; Replacement schedule; Material type; Water content; Dk/t · transmissibility; Base curve; Diameter; Parameter grid
- Parameter coverage
- Complete within the cited parameter grid
- Listed parameters
- 6068 listed combinations
- Search aliases
- Ultra multifocal toric, Ultra MFA
Parameter matches describe the cited U.S. source grid. They do not confirm stock or establish clinical interchangeability.