INFUSE One-Day for Astigmatism
Manufacturer-listedBausch + Lomb · Toric · Daily
Daily disposable toric lens with separate low-minus, high-minus, and plus parameter blocks.
Core specifications
- Lens design
- Toric
- Replacement schedule
- Daily
- Material
- Silicone hydrogel
- Material name
- kalifilcon A
- Base curve
- 8.6 mm
- Diameter
- 14.5 mm
- Water content
- 55%
- Cylinder / axis
- Combination dependent — see parameters
- Add power / label
- Not applicable
- Market
- United States
- Product status
- Manufacturer-listed
Oxygen properties
Manufacturer lists Dk/t 107 at −3.00 D. The product parameter table does not specify its measurement method or unit scale. Dk is not reported here and is not inferred from Dk/t. Dk and Dk/t are distinct properties; neither is calculated from the other.
Find a valid combination
Choose one or more parameters. All selected values must occur together in a single lens variant. This checks the documented parameter grid, not current stock.
−2.25 and −2.75 D cylinders are listed only for plano through −6.00 D, with restricted axes. High-minus and plus spheres use only −0.75, −1.25, and −1.75 D cylinders and restricted axes. See the source footnote for each block.
2450 combinations represented from the source grid. Individual values cannot be freely combined.
View listed combinations (2450 total)
Each row is one combination represented from the source grid. “Not applicable” means this design does not use that parameter.
| Variant | Sphere (D) | Cylinder (D) | Axis (°) | Add power / label | Base curve (mm) | Diameter (mm) |
|---|---|---|---|---|---|---|
| Low minus · standard cylinders · all 10° axes | -6.00 | -0.75 | 10° | Not applicable | 8.6 | 14.5 |
| Low minus · standard cylinders · all 10° axes | -6.00 | -0.75 | 20° | Not applicable | 8.6 | 14.5 |
| Low minus · standard cylinders · all 10° axes | -6.00 | -0.75 | 30° | Not applicable | 8.6 | 14.5 |
| Low minus · standard cylinders · all 10° axes | -6.00 | -0.75 | 40° | Not applicable | 8.6 | 14.5 |
| Low minus · standard cylinders · all 10° axes | -6.00 | -0.75 | 50° | Not applicable | 8.6 | 14.5 |
| Low minus · standard cylinders · all 10° axes | -6.00 | -0.75 | 60° | Not applicable | 8.6 | 14.5 |
| Low minus · standard cylinders · all 10° axes | -6.00 | -0.75 | 70° | Not applicable | 8.6 | 14.5 |
| Low minus · standard cylinders · all 10° axes | -6.00 | -0.75 | 80° | Not applicable | 8.6 | 14.5 |
| Low minus · standard cylinders · all 10° axes | -6.00 | -0.75 | 90° | Not applicable | 8.6 | 14.5 |
| Low minus · standard cylinders · all 10° axes | -6.00 | -0.75 | 100° | Not applicable | 8.6 | 14.5 |
| Low minus · standard cylinders · all 10° axes | -6.00 | -0.75 | 110° | Not applicable | 8.6 | 14.5 |
| Low minus · standard cylinders · all 10° axes | -6.00 | -0.75 | 120° | Not applicable | 8.6 | 14.5 |
| Low minus · standard cylinders · all 10° axes | -6.00 | -0.75 | 130° | Not applicable | 8.6 | 14.5 |
| Low minus · standard cylinders · all 10° axes | -6.00 | -0.75 | 140° | Not applicable | 8.6 | 14.5 |
| Low minus · standard cylinders · all 10° axes | -6.00 | -0.75 | 150° | Not applicable | 8.6 | 14.5 |
| Low minus · standard cylinders · all 10° axes | -6.00 | -0.75 | 160° | Not applicable | 8.6 | 14.5 |
| Low minus · standard cylinders · all 10° axes | -6.00 | -0.75 | 170° | Not applicable | 8.6 | 14.5 |
| Low minus · standard cylinders · all 10° axes | -6.00 | -0.75 | 180° | Not applicable | 8.6 | 14.5 |
| Low minus · standard cylinders · all 10° axes | -6.00 | -1.25 | 10° | Not applicable | 8.6 | 14.5 |
| Low minus · standard cylinders · all 10° axes | -6.00 | -1.25 | 20° | Not applicable | 8.6 | 14.5 |
| Low minus · standard cylinders · all 10° axes | -6.00 | -1.25 | 30° | Not applicable | 8.6 | 14.5 |
| Low minus · standard cylinders · all 10° axes | -6.00 | -1.25 | 40° | Not applicable | 8.6 | 14.5 |
| Low minus · standard cylinders · all 10° axes | -6.00 | -1.25 | 50° | Not applicable | 8.6 | 14.5 |
| Low minus · standard cylinders · all 10° axes | -6.00 | -1.25 | 60° | Not applicable | 8.6 | 14.5 |
| Low minus · standard cylinders · all 10° axes | -6.00 | -1.25 | 70° | Not applicable | 8.6 | 14.5 |
| Low minus · standard cylinders · all 10° axes | -6.00 | -1.25 | 80° | Not applicable | 8.6 | 14.5 |
| Low minus · standard cylinders · all 10° axes | -6.00 | -1.25 | 90° | Not applicable | 8.6 | 14.5 |
| Low minus · standard cylinders · all 10° axes | -6.00 | -1.25 | 100° | Not applicable | 8.6 | 14.5 |
| Low minus · standard cylinders · all 10° axes | -6.00 | -1.25 | 110° | Not applicable | 8.6 | 14.5 |
| Low minus · standard cylinders · all 10° axes | -6.00 | -1.25 | 120° | Not applicable | 8.6 | 14.5 |
Showing the first 30 of 2450 listed combinations. Select more parameters to narrow the list.
Official manufacturer sources
The current U.S. product page and its cylinder/axis footnote define the encoded grid through −8.00 D. Broader regulatory insert ranges are not used to infer additional marketed combinations.
−2.25 and −2.75 D cylinders are listed only for plano through −6.00 D, with restricted axes. High-minus and plus spheres use only −0.75, −1.25, and −1.75 D cylinders and restricted axes. See the source footnote for each block.
Accessed
Location: Parameters section and footnote # immediately below it: Low Minus, High Minus, Plus
Supports: U.S. market; Replacement schedule; Material type; Water content; Dk/t · transmissibility; Base curve; Diameter; Parameter grid
- Parameter coverage
- Complete within the cited parameter grid
- Listed parameters
- 2450 listed combinations
- Search aliases
- Infuse toric
Parameter matches describe the cited U.S. source grid. They do not confirm stock or establish clinical interchangeability.