ACUVUE OASYS MAX 1-Day MULTIFOCAL for ASTIGMATISM
Manufacturer-listed · launch status unconfirmedACUVUE · Multifocal toric · Daily
Daily disposable multifocal toric lens listed in the current U.S. product guide. Commercial availability has not been verified.
Core specifications
- Lens design
- Multifocal toric
- Replacement schedule
- Daily
- Material
- Silicone hydrogel
- Material name
- senofilcon A
- Base curve
- 8.5 mm
- Diameter
- 14.3 mm
- Water content
- 38%
- Cylinder / axis
- Combination dependent — see parameters
- Add power / label
- Combination dependent — see parameters
- Market
- United States
- Product status
- Manufacturer-listed · launch status unconfirmed
Oxygen properties
Dk/t is reported in ×10⁻⁹ (cm/s)(mL O₂/mL·mmHg), at the center of a −3.00 D lens at 35°C using a polarographic method with boundary and edge corrections. Dk is not separately supplied in the cited specification table. Dk and Dk/t are distinct properties; neither is calculated from the other.
Find a valid combination
Choose one or more parameters. All selected values must occur together in a single lens variant. This checks the documented parameter grid, not current stock.
Sphere −9.00 to +6.00 D in 0.25 D steps. LOW, MID and HIGH are manufacturer add categories, not exact add powers. The product page describes prescribed-add bands of +0.75 to +1.25, +1.50 to +1.75 and +2.00 to +2.50 D respectively; these are not extra lens add values. The actual lens cylinder is −1.00 D, not every cylinder up to the stated fitting range of 1.75 D. The 10 listed axes are preserved. The product page also retains a “coming soon” heading; listing here does not confirm launch or stock.
1830 combinations represented from the source grid. Individual values cannot be freely combined.
View listed combinations (1830 total)
Each row is one combination represented from the source grid. “Not applicable” means this design does not use that parameter.
| Variant | Sphere (D) | Cylinder (D) | Axis (°) | Add power / label | Base curve (mm) | Diameter (mm) |
|---|---|---|---|---|---|---|
| −1.00 cylinder / 10 listed axes / LOW, MID, HIGH | -9.00 | -1.00 | 10° | LOW | 8.5 | 14.3 |
| −1.00 cylinder / 10 listed axes / LOW, MID, HIGH | -9.00 | -1.00 | 10° | MID | 8.5 | 14.3 |
| −1.00 cylinder / 10 listed axes / LOW, MID, HIGH | -9.00 | -1.00 | 10° | HIGH | 8.5 | 14.3 |
| −1.00 cylinder / 10 listed axes / LOW, MID, HIGH | -9.00 | -1.00 | 20° | LOW | 8.5 | 14.3 |
| −1.00 cylinder / 10 listed axes / LOW, MID, HIGH | -9.00 | -1.00 | 20° | MID | 8.5 | 14.3 |
| −1.00 cylinder / 10 listed axes / LOW, MID, HIGH | -9.00 | -1.00 | 20° | HIGH | 8.5 | 14.3 |
| −1.00 cylinder / 10 listed axes / LOW, MID, HIGH | -9.00 | -1.00 | 70° | LOW | 8.5 | 14.3 |
| −1.00 cylinder / 10 listed axes / LOW, MID, HIGH | -9.00 | -1.00 | 70° | MID | 8.5 | 14.3 |
| −1.00 cylinder / 10 listed axes / LOW, MID, HIGH | -9.00 | -1.00 | 70° | HIGH | 8.5 | 14.3 |
| −1.00 cylinder / 10 listed axes / LOW, MID, HIGH | -9.00 | -1.00 | 80° | LOW | 8.5 | 14.3 |
| −1.00 cylinder / 10 listed axes / LOW, MID, HIGH | -9.00 | -1.00 | 80° | MID | 8.5 | 14.3 |
| −1.00 cylinder / 10 listed axes / LOW, MID, HIGH | -9.00 | -1.00 | 80° | HIGH | 8.5 | 14.3 |
| −1.00 cylinder / 10 listed axes / LOW, MID, HIGH | -9.00 | -1.00 | 90° | LOW | 8.5 | 14.3 |
| −1.00 cylinder / 10 listed axes / LOW, MID, HIGH | -9.00 | -1.00 | 90° | MID | 8.5 | 14.3 |
| −1.00 cylinder / 10 listed axes / LOW, MID, HIGH | -9.00 | -1.00 | 90° | HIGH | 8.5 | 14.3 |
| −1.00 cylinder / 10 listed axes / LOW, MID, HIGH | -9.00 | -1.00 | 100° | LOW | 8.5 | 14.3 |
| −1.00 cylinder / 10 listed axes / LOW, MID, HIGH | -9.00 | -1.00 | 100° | MID | 8.5 | 14.3 |
| −1.00 cylinder / 10 listed axes / LOW, MID, HIGH | -9.00 | -1.00 | 100° | HIGH | 8.5 | 14.3 |
| −1.00 cylinder / 10 listed axes / LOW, MID, HIGH | -9.00 | -1.00 | 110° | LOW | 8.5 | 14.3 |
| −1.00 cylinder / 10 listed axes / LOW, MID, HIGH | -9.00 | -1.00 | 110° | MID | 8.5 | 14.3 |
| −1.00 cylinder / 10 listed axes / LOW, MID, HIGH | -9.00 | -1.00 | 110° | HIGH | 8.5 | 14.3 |
| −1.00 cylinder / 10 listed axes / LOW, MID, HIGH | -9.00 | -1.00 | 160° | LOW | 8.5 | 14.3 |
| −1.00 cylinder / 10 listed axes / LOW, MID, HIGH | -9.00 | -1.00 | 160° | MID | 8.5 | 14.3 |
| −1.00 cylinder / 10 listed axes / LOW, MID, HIGH | -9.00 | -1.00 | 160° | HIGH | 8.5 | 14.3 |
| −1.00 cylinder / 10 listed axes / LOW, MID, HIGH | -9.00 | -1.00 | 170° | LOW | 8.5 | 14.3 |
| −1.00 cylinder / 10 listed axes / LOW, MID, HIGH | -9.00 | -1.00 | 170° | MID | 8.5 | 14.3 |
| −1.00 cylinder / 10 listed axes / LOW, MID, HIGH | -9.00 | -1.00 | 170° | HIGH | 8.5 | 14.3 |
| −1.00 cylinder / 10 listed axes / LOW, MID, HIGH | -9.00 | -1.00 | 180° | LOW | 8.5 | 14.3 |
| −1.00 cylinder / 10 listed axes / LOW, MID, HIGH | -9.00 | -1.00 | 180° | MID | 8.5 | 14.3 |
| −1.00 cylinder / 10 listed axes / LOW, MID, HIGH | -9.00 | -1.00 | 180° | HIGH | 8.5 | 14.3 |
Showing the first 30 of 1830 listed combinations. Select more parameters to narrow the list.
Official manufacturer sources
Reviewed November 9, 2026 against U.S. Johnson & Johnson Vision professional product specifications and the current v17 guide. Completeness describes the published parameter grid, not stock or the entire ACUVUE portfolio. Package quantities are not modeled.
Sphere −9.00 to +6.00 D in 0.25 D steps. LOW, MID and HIGH are manufacturer add categories, not exact add powers. The product page describes prescribed-add bands of +0.75 to +1.25, +1.50 to +1.75 and +2.00 to +2.50 D respectively; these are not extra lens add values. The actual lens cylinder is −1.00 D, not every cylinder up to the stated fitting range of 1.75 D. The 10 listed axes are preserved. The product page also retains a “coming soon” heading; listing here does not confirm launch or stock.
Accessed
Location: Lens specifications table and oxygen-transmissibility footnote.
Supports: Identity; Replacement schedule; Material type; Sphere power; Base curve; Diameter; Water content; Dk/t · transmissibility; Cylinder power; Axis; Add power / label
Accessed · Revision: PP2020ACLP4800 v17 · ©2026
Location: Page 1: product column and parameter grid; page 4: measurement footnotes. Linked from the U.S. Lens Parameters page.
Supports: Identity; Replacement schedule; Material type; Sphere power; Base curve; Diameter; Water content; Dk/t · transmissibility; Cylinder power; Axis; Add power / label
- Parameter coverage
- Complete within the cited parameter grid
- Listed parameters
- 1830 listed combinations
- Search aliases
- Max multifocal toric, Johnson and Johnson
Parameter matches describe the cited U.S. source grid. They do not confirm stock or establish clinical interchangeability.